Your First Job, End to End
One inspection all the way through: create the job, capture it on the iPhone, review the findings, approve the areas, build the scope, and deliver the report. What each stage produces and what to check before moving on.
9 min read
This is one inspection all the way through — from an empty job list to a report you'd hand a carrier. Roughly a day of elapsed time, most of it waiting on your own review.
Before you start
- The property address
- Whichever of these you have: policy PDF, claim number, carrier, date of loss
- The iOS app installed (iPhone, iOS 18.4 or later) and signed in. Only Field Inspectors and Super Admins can sign in to the iPhone app, so whoever captures needs one of those two roles
- A verified email on your account. Estimatics asks you to verify it before you can create a job
You don't need any of it complete. The job is a container you fill as you go.
On the 14-day free trial you can create up to 3 jobs, so make your first one a real inspection. See the free trial for the full limits.
1. Create the job
Jobs → Create. Two routes: upload the policy and let Estimatics pre-fill the form, or fill the three steps yourself.
The field that matters most is the workflow type ("What kind of job is this?") — it decides which stages the job passes through and which tabs it shows. For a standard claim, that's Insurance Claim — Inspection & Estimate. You can't change it later.
Nothing is saved until you finish the form. If you leave halfway, you start over, so have the address and owner name at hand.
The job is created at New. Assign it to the inspector and it moves to Inspection Assigned; the assignee sees it in their iOS queue.
ℹ Note
On the web, Super Admins, Admins, and Coordinators can create jobs; Field Inspectors create them from the iPhone, and Estimators can't create them. Editing a job's details and deleting jobs take a Super Admin or Admin. Coordinators also assign people to jobs from the scheduler and Bulk Assign.
→ Creating a job · Workflow types · The Jobs list and Bulk Assign
You can also create a job from the iPhone with Create Job — useful when you're already at a property that wasn't on the schedule. It needs a signal.
2. Capture the property
Open the job in the iOS app and start capturing. This is the stage that determines the quality of everything downstream — the AI reads photographs, and it cannot see what you didn't shoot.
Assign every photo to an area. A photo that belongs to "Master Bathroom" produces a far better finding than a loose photo, because the model knows what it's looking at. Estimatics ships a catalog of room and area names, residential and commercial.
Shoot the sequence, not the highlight. Wide shot of the room, medium of the damaged wall, close-up of the damage, and a close-up with a scale reference. The wide shot is what proves the close-up is where you say it is.
Record video where a still won't carry it — an active leak, a walkthrough of a whole floor, a roof elevation. iPhones that support MultiCam can also use Dual Video, which records the main camera with a small front or ultra-wide camera inset.
Say it out loud. Voice notes and photo notes are created on the iPhone and travel with the photo, so the office can hear and read what the inspector said in front of the damage.
Run a LiDAR scan of the interior. That's what produces the floor plan and the per-area dimensions the estimate prices against. On every plan, including FIELD. LiDAR needs an iPhone 12 Pro or later Pro or Pro Max model (or an iPad Pro), and it covers interiors only — Estimatics doesn't measure roofs.
No signal is fine. Capture keeps working offline and uploads when you're back in range. Don't wait around for bars.
→ Capturing photos · Voice notes and photo notes · LiDAR scanning · Working offline
3. Review what came in
Open the job on the web dashboard, Capture tab. Media appears as it syncs — you can start reviewing before the inspector has left the property.
Check the coverage: every affected area photographed, every photo in the right room, nothing obviously blurry standing alone as the only evidence for something important. Documents such as the policy go in the Files area, and the Inspection Guide checklist shows what's still missing.
→ Files and the Inspection Guide
Fix gaps now. Re-shooting is a phone call while somebody is still on site; it's a second trip tomorrow.
4. Run the analysis
Analyze tab. On SCOPE and CERTIFY, photos are analyzed automatically after they upload, within your monthly AI allowance, so areas often arrive with findings already proposed. On FIELD, you start it: open an area and choose Analyze. On the web the trigger works per area; the iPhone also lets you analyze selected photos.
What comes back is a finding per piece of damage: damage type, severity (low, moderate, high, critical), the material affected, where it is, a technical description, an evidence note, a confidence level, and a 0–100 score on the photograph's own evidentiary quality.
Every finding the AI proposes starts as a proposal, not yet yours. Work through them:
- Keep what matches what you saw
- Edit the severity or location where the photo misled it
- Remove the false positives — a shadow, normal wear, an old repair
- Add Finding for what the AI couldn't see. Manual findings sit in the same list
Then choose Approve area on each area you've reviewed. Approving marks the area's proposed items as confirmed, and approved areas are what the estimate is built from.
The evidence coverage signal tells you, area by area, where the file is thin — read it before you consider this stage done.
→ How findings work · Areas and approval · Evidence coverage
5. Check the geometry
Geometry tab. Your LiDAR scans render as floor plans and a 3D model, with per-area dimensions — floor area, paintable area, perimeter, ceiling height, walls, and doors and windows.
Verify the areas that will drive quantities. An unscanned room has no measurements, and an area with no dimensions prices at $0 until you link it to a scanned room. If an area's measurements didn't link up, use Assign geometry on it in Analyze.
→ Floor plans from LiDAR · Measurements · The web Geometry editor
6. Build the estimate
Estimate tab. Choose Build with AI. Estimatics builds the line items from the confirmed findings in your approved areas, takes quantities from the scan measurements, and prices them against the property's region. The job needs a damage type for this to work. If some areas aren't approved yet, Estimate tells you and offers Generate anyway.
Then do the part that's yours: check quantities against the geometry, check each line against the evidence panel, and clear the warnings. The line check flags problems per line, and What's missing lists what the estimate still needs. A line you haven't stood behind is a line the other side will find.
Field Inspectors have no access to this tab, and the estimate builder needs a computer or tablet screen.
→ AI Scope Generation · Validation and "What's missing" · Pricing confidence
7. Deliver
Reports tab. Pick a report type and Estimatics composes the sections and renders the PDF.
Damage Report, Findings, Geometry Report, and Custom Report compose on any plan. Analysis, Estimate, and Complete Report need SCOPE or CERTIFY, because the estimate table and the written narrative are SCOPE-tier sections.
The estimate goes out inside the report, or as a Xactimate (ESX) export at $10 per export.
Move the job to Completed when the deliverable is ready, then Delivered when it goes out. When a job reaches Completed, Estimatics composes its report automatically (Complete Report on SCOPE, CERTIFY, and the trial; Damage Report on FIELD). The job header shows "Report generating…" and then "Job Report".
→ Report types · Finalizing and editing reports · Exporting
What to check before you call it done
- Every finding reviewed, not just the ones you agreed with
- No high-severity finding resting on a low-scoring photograph
- Quantities reconciled against the geometry, not the defaults
- The policy on file, if you have it — coverage context is what makes the coverage notes worth reading
- The report opened and read, front to back, before it leaves
Frequently asked questions
Is there a limit on jobs? Not on a paid plan. The 14-day free trial allows 3 jobs.
Can I duplicate a job? Not currently. Each job is one property and one inspection event. Re-inspecting the same property means a new job.
Can a job cover multiple buildings? One job, one property address. For a multi-building commercial site, create a job per building.
Can I delete a job? Super Admins and Admins can, but only while the job is in New, Inspection Assigned, or Inspection Scheduled. There's no trash: a deleted job isn't recoverable from the web. Once the inspection has started, change the status to Closed or Cancelled instead.
Do I have to do the stages in order? No, but each one feeds the next. An estimate built before you've confirmed the findings and approved the areas is an estimate built on proposals.
Something isn't working and I'm stuck. Who do I ask? Use Request Support in the app or email support@aiestimatics.com. See Getting help.
Navigate the workspace
What each of the nine tabs does.
Capture photos with the iOS app
Technique that produces better findings.
Workflow types and statuses
Which stages your job actually passes through.
Scheduling and assignment
Getting the right inspector to the right property.
Last updated: October 2026 · Questions? Email support@aiestimatics.com
Last updated: October 2026 · Feedback on this article