LiDAR 3D Scanning with RoomPlan
How to scan the interior of a property with the LiDAR sensor on a supported iPhone or iPad Pro, what the scan produces, how to recover a scan that didn't process, and where to see it on the web.
8 min read
A LiDAR scan turns a walk through the property into a 3D model and a measured floor plan, with no tape measure. Estimatics uses Apple's RoomPlan on iPhones and iPads that have a LiDAR sensor. You can scan a single room or keep walking through the whole house: the app records in segments and stitches them together.
The measurements from the scan (floor area, perimeter, ceiling height, paintable area, walls, doors and windows) feed the job's Geometry tab and, from there, the estimate.
LiDAR scanning covers interiors only. Roof measurement isn't offered, and exterior geometry is coming soon.
Supported devices
The scan needs Apple's LiDAR depth sensor:
| Device | LiDAR support |
|---|---|
| iPhone 12 Pro / Pro Max and later Pro models | ✓ |
| iPad Pro (2020 and later) | ✓ |
| iPhone 14, iPhone 15 (non-Pro) | ✗ |
| iPad Air, iPad mini | ✗ |
The app needs iOS 18.4 or later.
The "LiDAR SCAN" mode still appears on devices without a LiDAR sensor, but the scan won't work there. If you're not sure about your device, open Settings → "Technical" → "Capture diagnostics" in the app. It shows whether your device supports LiDAR.
LiDAR is available on every plan. The free trial includes 2 LiDAR scans for the whole account.
How to scan
Start the inspection first. Capture stays locked until you tap "Start Inspection".
- Open the job in the app and open the capture screen ("Capture" → "LiDAR Scan", or choose "LiDAR SCAN" in the mode selector). The screen reads "Press Start to Scan".
- Tap the center button to start.
- Walk slowly past the walls, doors and windows. A minimap shows what's been captured. A flashlight button helps in dark rooms.
- Take photos while you scan with the photo button. Photos taken during a scan are placed in the room you're in, so they're filed to the right area automatically.
- Tap the center button again to finish. The app shows "Processing...".
While you scan, the area chip at the top reads "Scanning — rooms auto-detected". You don't pick an area: the scan finds the rooms.
In a large house, keep going. When the scan gets long, the app closes a segment and carries on without stopping, then joins the segments into one model. You can't switch to photo or video while a scan is running.
ℹ Note
If the app shows "No walls or floors were detected. Please scan the room again.", start over with better light and slower movement. If it shows "LiDAR scanning was unsuccessful. Captured images will be discarded", the photos taken during that scan are lost too, so retake them.
Review the scan and confirm the room names
When processing finishes, the review screen opens:
- Check the "3D Model", "Floor Plan" and "Pictures" tabs.
- Tap "Review AI Names". The AI has named each room from the scan. For each one, tap "Confirm name" or "Change name", then "Save". Nothing is final until you confirm. "Later" lets you do it afterward.
- Tap "Complete". The app confirms "3D Plan, Floor Plan and Images are saved successfully".
Renaming a room needs a connection. If it fails ("Rename failed"), try again once you have signal, or rename the area later in the Geometry tab.
If you tap "Cancel" → "Cancel and Exit", the 3D model and floor plan are lost, but the photos you took are kept.
If a scan doesn't process
Processing can occasionally fail. The scan is kept on the phone so you don't have to repeat the visit:
- "Scan Not Processed": choose "Try Again", "Save for Later" or "Discard Scan".
- If you saved it for later, the next time you open the scanner you'll see "Unfinished LiDAR Scan" with "Process Now", "Later" or "Discard".
The saved copy lives only on that phone. A discarded scan can't be recovered. If you reached the trial's scan limit, the scan is also saved for later.
What a scan produces
- A 3D model of the scanned space
- A 2D floor plan with walls, doors and windows
- Measurements per area: floor area, perimeter, ceiling height and paintable area, plus walls and doors/windows
- The rooms as areas in the job, with the photos you took during the scan already filed to them
Everything uploads on its own when the phone has a connection, like your photos and videos.
Where to see the scan
On the iPhone
- "Capture" → "3D Scans" or "Floor Plans": open a scan or floor plan, pan and pinch to zoom, use "Draw" to annotate the floor plan, or "Select" to download, share or delete. A 3D model and its floor plan go together: deleting one deletes the other.
- "Geometry" → "INTERIOR": "FLOOR PLAN" with measurements per area, "3D MODEL" with "Orbit", "Walk" and "Measure", and "ELEVATIONS" with each wall's length, height and net area.
On the web
- Capture → "3D Scan": a quick 3D view of each scan. Drag to rotate.
- Capture → "Floor Plan": the floor plan image, with zoom and "Download floor plan".
- Geometry tab: the interactive floor plan. Super Admins, Estimators and Field Inspectors can split, merge and rename areas (Admins and Coordinators can look but not save changes). Everyone can explore the "3D MODEL" with "Orbit", "Walk", "Measure" and an automatic "Tour", and see each wall in "ELEVATIONS".
The web 3D model is rebuilt from the floor plan, with generic furniture for the objects the scan detected. It isn't the original 3D file from the iPhone and has no real textures.
Scans can't be uploaded from the web, and you can't scan from the web.
→ The web Geometry editor · Floor plans and 3D models
From the scan to the estimate
Scanned rooms carry their measurements into Analyze. In the Analyze tab, click "Assign" on an area (or "Assign measures" in its dossier) and pick the scanned room in "Assign geometry". The area's estimate then uses the real dimensions. An area with no measurements can show $0 in the estimate.
→ Areas and approval · Measurements
Tips for best results
- Move slowly. Moving too fast makes the sensor miss surfaces.
- Use good light. Failed scans are most often fixed by more light and a slower pace. Use the flashlight button in dark rooms.
- Cover every wall, door and window. Pause briefly at corners.
- Clear obstructions where you can. Large objects like stacked boxes can hide walls.
- Take your photos during the scan. They're placed in the right room without any sorting later.
- Confirm the room names before you leave. It's faster on site than fixing them later.
Offline capability
The scan itself runs on the device and doesn't need a connection. The model, floor plan and photos are saved on the phone and upload on their own when you're back online. Renaming rooms during review needs a connection.
Don't sign out with files still waiting to upload: "Log Out Anyway" can lose captures that haven't synced.
Frequently asked questions
How accurate are LiDAR measurements? The measurements come from Apple's RoomPlan. Accuracy improves with slower movement and better light. Review the floor plan in Geometry before you build the estimate.
Can I re-scan a room if the first attempt was incomplete? Yes. Scan it again. To remove the incomplete scan, go to "Capture" → "3D Scans" in the app, tap "Select" and delete it (its floor plan is deleted with it).
Do I need one scan per room? No. You can scan the whole interior in one pass; the app stitches the segments together. Two separate scans can't be merged by hand afterward.
Can I fix a room that the scan split wrong, or that has the wrong name? Yes. In the Geometry tab (web or iPhone), split or merge areas and rename them. Renames carry over to the photos and to Analyze.
Can I scan the roof or the outside of the building? No. Scanning is interior only. Roof measurement isn't offered, and exterior geometry is coming soon.
My device has no LiDAR. Can I still use Estimatics? Yes. Photos, video, notes and the rest of the job work the same. You just won't get a scanned floor plan.
Capturing photos
How to capture photos that produce accurate AI findings.
The web Geometry editor
Floor plan layers, split and merge areas, the 3D model and elevations.
How media syncs
How scan files upload and sync to the web.
Organizing media by area
How scanned rooms, photos and areas fit together.
Last updated: October 2026 · Questions? Email support@aiestimatics.com
Last updated: October 2026 · Feedback on this article