Files and the Inspection Guide

Keep the policy, carrier letters and other claim documents on the job, have Estimatics read them for you, see what evidence is still missing with the Inspection Guide, and learn why field capture waits for "Start Inspection".

10 min read


Three parts of the Capture tab answer three everyday questions:

  • "Files": where do the claim's documents go, and can Estimatics read them for me?
  • The Inspection Guide: what evidence is still missing before the inspection counts as complete?
  • "Start Inspection": why can't I add photos to this job yet?

At a glance

WhatWhoPlan
Upload documents in "Files"Every role, until the job is Closed or CancelledEvery plan
Have a policy readAnyone can upload and review it. Applying values takes a Super Admin, Estimator or Field InspectorEvery plan, including FIELD
Have other documents read (mold assessments, carrier letters, estimates…)Super Admins and EstimatorsSCOPE and CERTIFY
See the Inspection GuideEvery role on the web. The iPhone capture screen shows its scoreEvery plan
Upload photos and videosThe job's assigned Field Inspector or a Super Admin, only while the job is "Inspection In Progress"Every plan

The Files tab

"Files" holds the paperwork of the claim: the policy, carrier letters, invoices, third-party reports. Open a job, click Capture, and pick "Files" in the "Media type" bar.

Documents are office paperwork, not evidence of a site condition, so any role can upload them: an Estimator, an Admin or a Coordinator doesn't need to be assigned to the job. Uploads stay open until the job is Closed or Cancelled.

To upload a document

  1. In "Files", click "+" ("Upload"). "Upload Attachments" opens.
  2. Drag files in, or browse ("Choose a file or drag and drop it here").
  3. For a PDF you want Estimatics to read, choose its type in "Document type (optional)" (see the next section).
  4. Click "Upload". Estimatics fingerprints each file before it uploads ("Preparing… N%").

Formats and limits

  • Formats: .jpeg, .jpg, .png, .pdf, .xls, .xlsx, .doc, .docx
  • Up to 100 MB per file and 10 files per upload

Opening a file

Click a file to open the viewer. PDFs display in the page ("Open in new tab" opens them full size), images zoom, and the arrows move to the next or previous file. Word and Excel files can't be previewed in the browser: you'll see "Preview not available for this file type. Download to view." Use "Download".

From the iPhone

In the app, open the job's Capture → "Docs", or tap "Attach Files", to attach a signed authorization or an invoice from the phone. Files can be up to 25 MB each in the app; for anything larger, upload it from the web. To have a document read by Estimatics, upload it from the web and pick its type there.


Having a document read

When you upload a PDF, the "Document type (optional)" picker decides what Estimatics does with it:

TypeWhat you getPlan
"Policy"Proposed policy values (carrier, policy number, dates, coverages, deductibles) that you apply to the job field by field, plus a policy summaryEvery plan, including FIELD
"Mold Assessment"The mold condition of each area, which you match to the job's roomsSCOPE and CERTIFY
"Carrier Estimate", "Carrier Letter", "Mold Clearance", "Inspection / Test Report", "Estimate / Invoice", "Other"A "Document Summary" with "Parties", "Key Dates", "Amounts", "Deadlines" and "Action Items". For reading only: it doesn't fill in job fieldsSCOPE and CERTIFY

ℹ Note

Which types you can pick depends on your plan and your seat. "Policy" is open to everyone on every plan. On FIELD, the other types are grayed out with "Available in SCOPE". On SCOPE and CERTIFY, Super Admins and Estimators can pick them, and a PDF they upload starts as "Other" ("PDFs are summarized automatically — pick a specific type for deeper analysis"). Admins, Coordinators and Field Inspectors see the other types grayed out, because their seats don't include document reading.

If you leave the type empty ("None"), the document is stored but not read.

Following the document

The file's card shows where it stands:

  • "Analyzing…": Estimatics is reading it
  • "Review": done. The values are ready for you, and not yet on the job
  • "Applied": you reviewed it and applied the values you chose
  • "Failed": the analysis didn't finish. Hover over the label to see why, for example "AI analysis failed. Try re-analyzing the document." or, on FIELD, "Requires SCOPE plan."

Reviewing and applying

  1. Click "Review" on the card, or "Review extraction" in the file viewer.
  2. For a policy, each row shows the value on the job next to the value Estimatics read. Tick the ones you want.
  3. Click "Apply selected". You'll see "N fields applied to job" and the card changes to "Applied".
  4. To change something later, open the file and use "Edit applied values", or "Re-analyze" to read the document again.

Nothing is written to the job until a person confirms it. Percentages, such as a hurricane deductible stated as 2%, are flagged "% requires review": convert them and enter the dollar amount yourself.

→ Document Intelligence: policies and other documents covers every policy field, the policy summary and mold assessments in detail.


The Inspection Guide

The Inspection Guide is the job's checklist of the evidence an inspection needs. It sits in the right-hand panel of Capture (use "Show inspection guide" if it's hidden). The "Guide" chip in the Capture toolbar shows the score and shows or hides that panel.

Reading it

  1. "N/M required · X%" tells you how many required items are done and the overall score.
  2. The bar is green once the score reaches the job's minimum (usually 80%), amber from 50%, and red below that.
  3. "Still needed" lists the required items not yet covered, with the minimum where one applies, such as "(min 4 photos)". Hover an item to see a hint about what to capture.
  4. When everything required is covered, you'll see "All required items captured."

How items get checked off

Estimatics sets the checklist for the job. As each photo uploads, its AI looks at the photo and matches it against the items still needed, on every plan. You don't tick items by hand.

On the iPhone

The capture screen shows the same score as a colored bar while you shoot, so the inspector can see how complete the evidence is before leaving the property.

Good to know

  • It's a checklist, not a gate. Items still pending don't stop anyone from marking the inspection complete.
  • You can't edit the checklist or create your own.
  • "No guide for this job yet." means there is no checklist for this job.

→ Evidence coverage shows completeness area by area in Analyze.


"Start Inspection" and who can add field evidence

Photos, videos and LiDAR scans are evidence: each one records who took it, when, where and on which device. To keep that record answerable, Estimatics only accepts field evidence from the inspector assigned to the job (or a Super Admin), and only once the inspection has started.

On the iPhone

  1. The inspector assigned to the job opens it and taps "Start Inspection" → "Confirm". You'll see "Job Inspection Started Successfully" and the capture menu opens.
  2. Until then, Capture stays locked: "Tap Start Inspection below to unlock Capture".
  3. Only the inspector assigned to the job can start it. To inspect a job yourself, get assigned to it first: when you can be assigned, the job's "Next step" card on the web offers "I’ll inspect it myself".

"Insurance Claim — Estimate Only" jobs have no field stage, so there's no inspection to start.

On the web

The web doesn't take photos with a camera, but it can upload extra photos and videos:

  • Only the job's assigned Field Inspector or a Super Admin
  • Only while the job is "Inspection In Progress"
  • A Super Admin who uploads evidence on a job assigned to someone else can do it, and the upload is recorded on the job

Estimators, Admins and Coordinators can't upload photos or videos. They can still upload documents in "Files". 3D scans and floor plans can't be uploaded from the web at all: they come only from a LiDAR scan in the iPhone app.

Messages you might see

  • "Start the inspection before capturing.": the job isn't "Inspection In Progress" yet.
  • "You are not assigned to this job.": only the assigned Field Inspector or a Super Admin can upload photos and videos.
  • "This job is closed to capture.": the job is Closed or Cancelled and accepts no uploads, documents included.
  • "A file with this name already exists.": rename the file and upload it again.

If the "+" button is missing, the job is Closed or Cancelled and accepts no uploads.


Frequently asked questions

I uploaded the policy and there's no "Review". It was probably uploaded without a type. Upload it again with "Document type (optional)" set to "Policy". If you see "A file with this name already exists.", rename the file first.

Why are the other document types grayed out? On FIELD, only "Policy" is included. On SCOPE and CERTIFY, other document types are read for Super Admins and Estimators; other roles' seats don't include document reading.

My Coordinator reviewed the policy but can't apply the values. Applying values and re-analyzing take a Super Admin, Estimator or Field Inspector. Admins and Coordinators see the button, but the system won't let them confirm.

Can my Estimator add photos from the office? No. Field evidence comes from the assigned inspector or a Super Admin. The Estimator can upload documents in "Files".

The inspector finished, and we need more photos. New field evidence needs the job back in the field stage. If the job's workflow allows it, use "Change Status" to move it back to "Inspection Scheduled" (a reinspection). The inspector then starts the inspection again.

The guide says 60%. Can the inspector still mark the inspection complete? Yes. The guide tells you what's missing; it doesn't block anything. Check "Still needed" before the inspector leaves, so nobody has to drive back.

Can I add my own checklist items? No. The checklist is set by Estimatics.



Last updated: October 2026 · Questions? Email support@aiestimatics.com

Last updated: October 2026 · Feedback on this article