Build with AI — From Approved Areas to Line Items

How "Build with AI" turns the confirmed damage in your approved Analyze areas into a draft line-item scope, how "Regenerate" protects your edits, and what to do when it comes back empty.

7 min read


"Build with AI" drafts the line items of your estimate from the damage you confirmed in Analyze. It reads each area you approved, writes the repair work that damage calls for, and prices every line from the catalog. You review the draft and adjust it line by line.

The AI proposes. You decide. Every line it drafts is yours to keep, edit, or remove.


Where the scope comes from

The scope is built from confirmed damage in approved areas, not from raw photos. The path is:

  1. Analyze — photos are analyzed and the AI proposes findings for each area. On SCOPE and CERTIFY, photos are analyzed automatically after upload, within your monthly AI allowance. On FIELD, you start the analysis yourself.
  2. Confirm — a person reviews the findings. Damage you declare by hand, or confirm from your notes, counts too, even when no photo shows it.
  3. "Approve area" — someone signs off on each area's dossier. Approved areas are what "Build with AI" reads.
  4. Estimate — click "Build with AI". The lines land in your estimate, grouped by area.

Quantities come from measurements. If an area is linked to a scanned room with "Assign geometry" in Analyze, the AI takes quantities from that scan. If there's no completed scan or measurement, the line is usually added without a quantity and counts in "Lines missing quantity" and in "What's missing". A few lines get a quantity from a standard scoping convention instead, so check those against the job.

→ Areas and approval in Analyze · How findings work


Who can use it

  • Super Admin and Estimator can build and regenerate the scope. Admin and Coordinator can view the estimate but not change it. Field Inspectors don't see the Estimate tab.
  • It's on every plan, as long as the account can use AI: an active subscription or the free trial. AI features turn off while an account is paused or past due.
  • The web estimate builder needs a computer or tablet. On a phone you'll see "The estimate builder needs a wider screen".

Building the first scope

  1. Open the job and go to the Estimate tab.
  2. If there's no estimate yet, you'll see "No estimate yet". Under the "Build with AI" button, a line tells you what's ready, for example "N scoped findings ready".
  3. Click "Build with AI".
  4. If some areas aren't approved yet, the dialog says "N areas not approved yet" and lists them. Approve them in Analyze first, or click "Generate anyway".
  5. Progress shows in the lines table: "Queued — waiting for the generator…", "Starting scope generation…", then "Estimating [area] · area i/N". You can keep working.
  6. When it's done you'll see "Estimate generated · N lines / M areas", followed by the validation result: "Validation: all rules passed." or "Validation: N failed · M warnings — see the verdict chip."

Prefer to start from scratch? Click "or create an empty estimate" and add lines yourself.

ℹ Note

"Build with AI" is greyed out? There are no findings to build from yet ("Analyze photos first"). Run the analysis in Analyze, confirm the findings, and approve the areas.


What you get

Each AI line comes with:

  • A catalog item with its code, unit, and activity. The catalog supplies the code and the price; the scope builder doesn't invent codes or prices of its own.
  • A quantity, taken from the linked scan when there is one.
  • A phase (for example Demolition, Remediation & Drying, or Reconstruction), so you can view the estimate by phase.
  • A note explaining why the work is needed, written for an adjuster or homeowner to read.
  • An Origin of "AI-generated", a Status (Confirmed or Inferred) and, on most lines, a Confidence level (high, medium, or low). See Confidence and status.
  • A link back to the findings and photos it came from, when it's tied to findings. Click the "Evidence" icon on the row to see them. See Evidence-linked estimation.

Regenerating the scope

Captured more evidence or approved another area? Click "Regenerate". The "Regenerate scope" dialog asks what should happen to the lines you already have:

OptionWhat it does
"Keep my changes" (recommended)Refreshes AI lines nobody touched and adds newly scoped findings. Your manual and edited lines stay.
"Replace the AI scope"Rebuilds every AI line from scratch. Manual lines you added are left untouched.
"Replace everything"Wipes the entire estimate, manual and AI, and rebuilds it. "This can't be undone."

Before you confirm, the dialog shows what will happen: how many lines are "Kept", "Refreshed", "Added", "Removed" or "Rebuilt".

Regenerate a single area

To redo one room without touching the rest, open the "Areas" panel and click the icon next to the area (its tooltip reads Regenerate only "[area]"). Pick how to treat that area's lines and click "Regenerate area". You'll see "Regenerating "[area]" — other areas untouched." If the area isn't approved yet, the dialog says "Area not approved yet" and offers "Generate anyway".

You can regenerate one area or the whole job, not several chosen areas at once.


Limits worth knowing

  • One generation per job at a time. If one is already running you'll see "A scope generation is already running for this job." Wait for it to finish.
  • The job needs a damage type. Set it in Overview → "Edit Damage & Insurance".
  • Some loss types aren't supported yet. For those, "Build with AI" produces no lines and you add them by hand.
  • Lines without a measurement have no quantity. Link the scanned room in Analyze with "Assign geometry" and the lines in that area are requantified automatically.

When the scope comes back empty

If generation finishes without lines, the table tells you why:

MessageWhat to do
"No damages defined yet"Analyze the photos or add damage to the areas in Analyze.
"Areas awaiting approval"Approve the areas in Analyze, or use "Generate anyway".
"No confirmed damages"Confirm the findings in Analyze.
"This job has no damage type"Set it in Overview → "Edit Damage & Insurance".
"This loss type is not supported yet"Add the lines by hand with "Add Line Item".
"Recipe library unavailable"A system configuration problem, not your job. Email support.
"Generation finished without lines"Review the areas and findings, then try again. If it repeats, email support.

On the iPhone

You can build the scope from the iPhone app too. Open "Estimate" and tap "Build with AI". To redo it, tap the regenerate button (the circular arrow) at the bottom. A "Rebuild scope" dialog asks you to choose "Keep my edits", "Replace AI lines" or "Rebuild everything". It needs a connection.


What to do with the draft

  • Keep the lines that match what you saw.
  • Edit quantities, activities, and pricing where your judgment differs.
  • Add work the photos couldn't show, like concealed damage or access.
  • Remove anything that doesn't belong. Removing a line doesn't delete any evidence or findings.
  • Check the validation chip and "What's missing" before the estimate goes out.

The draft saves you the blank page. It doesn't replace your review: the professional who sends the estimate is responsible for it.



Last updated: October 2026 · Questions? Email support@aiestimatics.com

Last updated: October 2026 · Feedback on this article