The Web Geometry Editor

How to use the web Geometry tab: read the floor plan and its layers, split, merge, detach and rename areas, walk the 3D model, read wall elevations, and link scanned rooms to your estimate with Assign geometry.

10 min read


The job's Geometry tab is where you review and correct what the iPhone's LiDAR scan measured. You get a floor plan you can edit, a 3D model you can walk through, and a face-on view of each wall. Your corrections apply to the whole job, so the areas you use in Analyze and Estimate match the real space.

You scan on the iPhone. You can't scan from the web. To learn how a scan becomes a plan, see Floor plans & 3D models from LiDAR.


Who can use it, and on which plan

  • Plans: interior geometry is included on FIELD, SCOPE and CERTIFY. The 14-day trial includes 2 LiDAR scans.
  • Viewing: every role can open the Geometry tab.
  • Editing: Super Admin, Estimator and Field Inspector can change the plan. Admin and Coordinator see the same tools, but their changes are not saved.
  • Screen size: the Geometry tab needs a computer or tablet. On a phone you'll see "The floor plan editor needs a wider screen". On iPhone, the Estimatics app has its own Geometry module (Geometry → INTERIOR).
  • Quick Quote jobs don't show the Geometry tab.

What's included today

  • Interior only. Geometry covers the inside of the building, scanned with LiDAR.
  • Roof measurement is not offered. There is no Roof section.
  • Exterior is coming soon. The "Exterior" section shows a "Coming soon" notice. It doesn't produce any exterior drawings yet.
  • Xactimate (ESX) export is available from "Export to Xactimate". Pricing: $10 per export, billed when you download it; CERTIFY includes 5 exports per user per month.

Open the Geometry tab

  1. Open the job and click the "Geometry" tab.
  2. At the top, choose "Interior".
  3. Pick a view: "FLOOR PLAN", "3D MODEL" or "ELEVATIONS".

What you might see first:

  • "Generating Interior Geometry…" — the scan is still processing. This usually takes a few seconds.
  • "No geometry yet" — the job has no processed scan. Scan the property with the iPhone app. If you already scanned, the phone may not have finished syncing, or processing failed.
  • "Failed to load geometry data" — try again later. If it keeps happening, email support@aiestimatics.com.

FLOOR PLAN

The floor plan shows the whole floor or single rooms, with their measurements.

  1. Pick the scan. If the job has several scans, choose one in the bar at the top.
  2. Filter by room. Click "All" or a room chip. You can also click a room on the plan.
  3. Turn layers on and off: "Perimeter", "Interior", "Openings", "Objects", "Labels", "Dimensions" and "Grid". The fullscreen button opens the plan full screen.
  4. Read the summary card. It shows "All Rooms" or the rooms you picked, with the floor (for example "Ground Floor" or "2nd Floor"): "Floor area", "Paintable area", "Ceiling height", "Perimeter", "Walls" and "Doors / Windows".
  5. Click a wall to jump to that wall in "ELEVATIONS".

Notices that can appear on the plan:

You seeWhat it means
"This scan failed to process"No floor plan could be built from that scan. Re-scan the area. Contact support if it keeps failing.
"This floor plan was processed with a degraded engine…"Shapes may be less accurate. If they look wrong, ask support to reprocess the scan.
"N areas on this scan could not be fully placed"Some areas couldn't be fully drawn on the plan. They are listed as chips instead. You can close this notice.
"Not on this plan (N)"A list of areas on the job that have no shape on this plan.

Correct how the scan divided the space

Sometimes the scan splits or joins spaces differently from how you want to scope them. For example, you may want the kitchen and dining room as two areas, or a hallway joined to the room next to it. The editor toolbar sits on the left of the plan. Hover a button to see its name:

  • "View & pan" — move around the plan without changing anything.
  • "Select & move boundary" — pick a boundary between two areas.
  • "Draw divider (split area)" — cut one area into two.
  • "Detach limit from wall" — free an area's limit from the wall it sits on.
  • "Apply edit" and "Cancel edit" — save or drop the change you're making.
  • The delete button and "Undo last edit" — remove a change (see below).

While you edit, chips show how much each area changes (for example "Kitchen +32 SF").

Split an area

  1. Choose "Draw divider (split area)".
  2. Click inside the area to start the divider, then click the second point. The line must cross the room from edge to edge.
  3. Adjust the divider with its handles, then click "Apply edit".
  4. In "Name the new area", type a name and click "Create area".

You'll see "Area divided — the new area is now on the plan."

Move a boundary

  1. Choose "Select & move boundary" and click a dashed boundary.
  2. Drag its endpoints or its center.
  3. Click "Apply edit". You'll see "Boundary updated — areas recalculated."

Merge two areas

  1. Choose "Select & move boundary" and click the dashed boundary between the two areas.
  2. Click "Delete boundary (merge areas)…".
  3. In "Delete boundary — merge areas", choose which area stays: "Keep [A] — absorb [B]" or the other way around. Hover each option to preview it on the plan.

Photos and data of the absorbed area move to the area that stays. You'll see "[B] merged into [A] — photos and data moved."

Detach a limit from a wall

  1. Choose "Detach limit from wall" and click a wall.
  2. The area's limit becomes a line you can drag. Drag the line or its endpoints. The wall itself never moves.
  3. Click "Apply edit".

If the wall is shared with another room, the strip you free passes to the neighbor.

Rename an area

  1. Click the edit icon on the room chip, or the edit icon on the area's card.
  2. In "Rename area", type the new name in "Area name" and click "Rename".

You can also rename areas from Analyze → Areas.

Undo or revert a change

  • "Cancel edit" drops the change you haven't applied yet.
  • To remove a divider, select it and click "Delete divider". To put back a boundary you moved, select it and click "Revert this edit".
  • "Undo last edit — …" removes the job's most recent edit. The label tells you what it will undo. It may be an edit someone else made, on the web or on an iPhone, so read the label first.

ℹ Note

It's not a drawing program. You can change the boundaries between areas, but you can't add or move walls, doors or windows. If a scan has no areas you can edit, the tools read "No editable areas in this scan".


3D MODEL

Walk through the property in 3D, for example to explain the damage to an adjuster or a homeowner.

  1. Choose how the camera moves: "Orbit" or "Walk".
  2. Turn layers on and off: "Walls", "Floors", "Openings", "Objects", "Labels" and "X-Ray".
  3. Click "Measure" to measure inside the model.
  4. Click "Tour" for an automatic walkthrough. "Exit Tour" ends it.

The 3D model is rebuilt from the floor plan, with generic furniture standing in for detected objects. It is not the original 3D file from the iPhone and has no real textures. If the model is empty, the scan has no processed walls.


ELEVATIONS

See each wall face-on, with its doors and windows. It helps with paint and drywall quantities.

  1. Pick a room with the chips.
  2. The room's plan is on the left and its list of walls on the right. Pick a wall to see it face-on.

If you see "No walls found for this room", that area was made with a boundary drawn by hand and has no scanned walls. Elevations are interior only.


How the measures reach your estimate

Areas created by the scan carry their own measurements. When an area in Analyze has no measurements, you link it to a scanned room.

  1. Open Analyze → Areas. An area without measurements shows "No geometry linked" or "No dimensions — estimate stays at $0".
  2. Click "Assign" on the area card, or "Assign measures" inside the open area.
  3. In "Assign geometry — [area]", pick a scanned room from the list or click it on the plan.
  4. Click "Link measures".

You'll see "Measures linked — N estimate lines requantified." The estimate lines for that area recalculate from the scan. The area then shows "Measures from [room]". To undo the link, open the same window and click "Unlink".

If the window says "No measured scan rooms yet", scan the property with the iPhone app first. To continue to the estimate, see Areas and approval.

Always check derived numbers against the space before you scope from them.


Frequently asked questions

I'm an Admin. Why aren't my changes saved? Admin and Coordinator can view the plan but not change it. Ask a Super Admin, Estimator or Field Inspector to make the edit.

Can I use the Geometry tab on my phone? No. Use a computer or tablet. On iPhone, use the Geometry module in the Estimatics app.

Can I draw a floor plan without a scan? No. The plan comes from an iPhone LiDAR scan.

Can I add a wall, door or window? No. You can split, merge, move, detach and rename areas. Scanned walls, doors and windows stay as scanned.

Do my changes show on the iPhone? Yes. Changes apply to the whole job, on the web and on the iPhone.

Where is the Roof section? Roof measurement is not offered. Geometry is interior only.

What does the Exterior section do? Nothing yet. Exterior geometry is coming soon.

Can I export the floor plan to Xactimate? Yes. The ESX export includes the sketch, at $10 per export, billed when you download it.

Is there a separate geometry report? No. The floor plan appears inside your reports.

The divider doesn't apply. If you see "The divider does not split the area — draw it across the room, edge to edge.", redraw it so it crosses the room from one side to the other.

I can't merge two areas. If you see "Those areas are not adjacent on the floor plan — a merge needs a shared boundary.", the areas don't touch. You can only merge areas that share a boundary.

It says "That limit is backed by a wall". That limit is a wall, not a boundary. Use "Detach limit from wall" and click the wall instead.



Last updated: October 2026 · Questions? Email support@aiestimatics.com

Last updated: October 2026 · Feedback on this article