Capturing Photos with the Mobile App
How to capture field photos the AI can read accurately — starting the inspection, area tagging, importing from your Camera Roll, technique, and what happens after the shutter.
11 min read
The quality of your inspection output — findings, scope, narrative — depends directly on the quality of your field photos. This guide covers how to capture photos the AI can read well and that hold up in review.
(Dimensions are a separate matter: they come from the LiDAR scan, not from your photos. See LiDAR scanning.)
Before you start
- Create the job on the web dashboard or in the iPhone app before you arrive at the property. A job you have already opened can keep working without signal.
- Check the phone. The app needs iOS 18.4 or later. It is built for iPhone and also installs on iPad. Only a Field Inspector or Super Admin can sign in to it. Keep more than 500 MB free — everything is saved on the phone first and uploads afterward.
- Open the job and tap Start Inspection. Until you do, Capture stays locked and the app says "Tap Start Inspection below to unlock Capture".
- Verify location is on. Each photo records where it was taken. Go to iOS Settings → Estimatics → Location and choose While Using App, with Precise Location on. If location is off for the app, the photo's details show "No location available".
The file limit: a single photo can be up to 25 MB, on every plan. Nothing an iPhone camera produces comes close.
Starting a capture session
- In the job, tap Capture, then Photos. The capture screen opens in PHOTO mode. (The other modes along the bottom are LiDAR SCAN, VIDEO, and DUAL VIDEO where your iPhone supports it.)
- Set your area (next section).
- Shoot with the white shutter button, either volume button, or the iPhone's Camera Control button if your model has one.
- Switch lenses with .5, 1, 2 and 3, or pinch to zoom. The .5 lens only appears on iPhones with an ultra-wide camera. Tap the thumbnail to review what you just shot without leaving the camera.
The Estimatics camera is separate from your iPhone's Photos app. Photos taken here belong to the job: each one is stamped with the date, location, area and a unique digital fingerprint (a SHA-256 hash), and uploads on its own in the background. They are not saved to your Camera Roll.
Assigning photos to areas
Every photo should belong to a room or area. That is how the AI and your report know where each piece of damage is on the property.
To set the area while shooting:
- Tap the area chip at the top of the capture screen. It reads No area — tap to set until you choose one.
- Pick the room you are in, or add a new one. The screen then shows "You're in: [area]".
- Every photo you take is filed to that area until you change it. The area stays selected when you switch between photo, video and scan modes.
Area names come from a shared room list. Prefer an existing name over a new one — new names split your evidence into extra areas. The list is shared by every Estimatics account, so a change made in Settings → Room Catalog (Super Admin and Admin, desktop only) affects everyone. Don't edit it; if a room you need is missing, add it as an area from the capture screen, or ask support.
To move a photo to a different area afterward (iPhone):
- Open the photo, tap the … menu, and choose Reassign Tag, or
- In Capture → Photos, tap Select, pick the photos, and use Assign Tag (or Add Tag to create a new one).
On the web you can't move a photo to an area by hand. For photos with no area, use Suggest areas for unassigned photos on the web or Suggest areas on the iPhone: the AI proposes an existing area for each photo and nothing moves until you tap Accept. See Organizing media by room and area.
Tip: Assign areas as you go — don't wait until after the inspection to tag 200 photos. It takes 5 seconds per area change and saves 30 minutes of organization later.
Adding to a photo while you're there
On accounts that include AI, you can open a photo in the iPhone gallery and record a voice note (up to 60 seconds, transcribed) or type a short text note. See Voice notes and photo notes. You can also draw on the photo — see Photo markup.
Photo technique for best AI results
The AI reads the photos you send it. On SCOPE and CERTIFY accounts, photos are analyzed automatically after they upload, within your monthly AI allowance. On FIELD, you start the analysis yourself from Analyze. Either way, the AI proposes findings and a person confirms them. These guidelines produce significantly better findings:
Coverage
- Photograph every surface — roof, all four elevations, every interior room affected
- Don't skip "minor" damage — a granule loss pattern, a cracked vent boot, or a dented gutter is worth documenting even if it seems small
- Take overlapping shots — for large surfaces like a roof, take photos that overlap by 30–40% so the AI can piece together the full picture
Distance
- Establish shots (full view): Step back far enough to capture the entire surface or elevation in one frame. These give the AI spatial context.
- Mid-range shots (3–10 feet): Show the area of damage clearly within the larger surface.
- Close-ups (1–3 feet): Capture the specific damage detail — impact marks, cracks, lifted shingles, water staining. The AI uses these to classify damage type and severity.
Use all three distances for every significant damage area — not just close-ups.
Lighting
- Avoid shooting directly into the sun — backlighting washes out surface detail
- Overcast days are ideal — diffuse light shows texture and damage without harsh shadows
- For dark surfaces (black shingles, dark siding): use your iPhone's exposure tap to prevent underexposure
- For interior water damage: turn on room lights, and use the app's flash if needed
Stability
- Blur costs you directly: clarity is 40 of the 100 points in the photo score the AI returns with each finding
- Tap to focus before shooting on textured surfaces
- On ladders: brace your elbow against your body before tapping the shutter
What to avoid
- Fingers in the frame — more common than you'd think on ladder shots
- Extreme angles — a surface shot from far off perpendicular is hard for the AI to read, and hard for a reviewer to judge
- Screenshots of other documents — only field photos belong in Photos. Put documents in the Files tab (see Files and the Inspection Guide)
- Duplicate shots — identical photos from the same angle don't add evidence value and slow AI processing
Minimum photo counts by inspection type
These are starting points — complex damage warrants more coverage.
| Inspection type | Minimum photos |
|---|---|
| Single-family roof inspection | 25–35 |
| Multi-family / commercial roof | 50–100+ |
| Interior water damage (1 room) | 15–20 |
| Interior water damage (multi-room) | 30–50 |
| Full property storm damage | 60–100+ |
| Fire damage | 80–150+ |
The job's Inspection Guide tracks how much of the required evidence you have captured. The capture screen shows your progress as a percentage, and the web Capture tab lists what is Still needed. See Files and the Inspection Guide.
Syncing your photos
Photos upload automatically while you shoot if you have a signal. The job shows an upload indicator while there's work outstanding: uploading, failed, or no network. When there's nothing pending, there's no indicator.
You can keep shooting regardless. Photos queue on the phone and upload as soon as a connection is available. Don't log out with Log Out Anyway or delete the app while photos are still waiting — anything not yet uploaded is lost.
→ How media syncs to the cloud
Reviewing photos before you leave the property
Before you leave the site, do a quick review in the Capture tab:
- Scroll through all photos and confirm every area is covered
- Check for any obviously blurry or poorly-lit shots — retake them while you're still on site
- Check that the job shows no upload indicator (uploading, failed or no network), which means nothing is still waiting to upload
It takes 3 minutes and prevents a return trip.
Frequently asked questions
Can I add photos from my iPhone Camera Roll? Yes, on the iPhone. In Capture → Photos, tap the photos icon next to Camera, accept the access prompt, and pick up to 20 photos at a time. They arrive in Unassigned, so assign them to areas afterward. Note that an imported photo's recorded date and location describe the moment you imported it, not the moment it was taken. Videos can't be imported from the Camera Roll.
Can I upload photos from the web? Only in a narrow case. On the web, open Capture → Photos and use the + button. Only the Field Inspector assigned to the job or a Super Admin can upload photos or videos, and only while the job is In Progress. The web accepts .jpeg, .jpg and .png photos, up to 25 MB each and 25 per batch. Everyone else can add documents in the Files tab. Scans and floor plans can't be uploaded from the web.
How many photos can I add to a job? There's no per-job photo cap on a paid plan. The one limit that exists is per file: 25 MB each. (The 14-day free trial is capped at 150 photos across the account — that cap is the trial's, not the plan's.)
Can I delete a photo after it's been uploaded? Yes, if you have permission to change the job's files. In the gallery, open the photo and choose Delete (on the iPhone, use the … menu). What happens next depends on your account. On a paid CERTIFY account, the photo is removed from the job and from reports, but the original is kept in Estimatics' evidence storage. On other plans and during the trial, the photo is deleted and can't be recovered. Either way, deleting a photo also deletes its findings in Analyze. If the job is under a legal hold, photos can't be deleted until the hold is released. On the iPhone, deleting needs a signal. If it fails, the photo reappears. See History and evidence.
What file formats are supported? Photos taken with the Estimatics camera are saved as JPEG. Photos imported from your Camera Roll can be JPEG, HEIC or PNG. Other formats (such as RAW, GIF or TIFF) are converted to JPEG on import. On the web, uploads are limited to .jpeg, .jpg and .png.
The AI didn't find damage I can clearly see in a photo — what happened? AI findings depend on photo clarity, distance, and angle. If damage isn't being detected, try adding a close-up photo from a more direct angle. You can also add a finding by hand in the Analyze tab regardless of what the AI detected. Also check that your monthly AI allowance hasn't run out, and that on FIELD you have started the analysis for the area.
Can I share photos with someone who doesn't have an account? Yes. See Sharing photos with a link. The link lasts 24 hours and shows more than the photos, so read that page first.
How media syncs to the cloud
What happens after you take a photo — upload queue, sync status, and troubleshooting.
Recording video inspections
Add a walkthrough video to complement your photo documentation.
Organizing media by room and area
Keep your inspection organized with area tags and filters.
Photo quality and the photo score
The 0–100 score the AI returns with every finding, and how to act on it.
Voice notes and photo notes
Say what the photo shows while you're standing in front of it.
Sharing photos with a link
The 24-hour share link and what the other person sees.
Last updated: October 2026 · Questions? Email support@aiestimatics.com
Last updated: October 2026 · Feedback on this article