Validation, What's Missing, Parameters & Totals

How Estimatics checks every line of your estimate, what the red and amber flags mean, how "What's missing" shows the facts the scope is still presuming, how to set overhead, profit, and tax, how depreciation is worked out, and how RCV, ACV, and Net Claim add up.

13 min read


Before an estimate leaves your hands, you want three answers: Are the lines consistent with each other and with the room? What is the scope still assuming? And what does the claim add up to? The Estimate tab answers all three on one screen:

  • Validation checks every line against a set of rules and flags problems in red or amber.
  • "What's missing" lists the facts the scope needs that nobody has entered yet, and the ones the system had to presume.
  • "Estimate Parameters" and the "Estimate Summary" hold your percentages and the totals: RCV, ACV, and Net Claim.

The iPhone app shows the validation list and "What's missing" too, but fixing things happens on the web. See Limits worth knowing.


Who can use it, and on which plan

  • Every plan. Validation, "What's missing", parameters, and totals are part of the Estimate tab on FIELD, SCOPE, and CERTIFY. The only AI piece in this article is the "Year Built" lookup, which needs an account that can use AI.
  • Super Admin and Estimator can change parameters and percentages and run "Repair". Admin and Coordinator can view everything here. They may still see the buttons, but changes are refused with an error.
  • Field Inspectors don't see the Estimate tab. That's by design.
  • On the web, computer or tablet only. In a phone browser, the tab shows "The estimate builder needs a wider screen". The iPhone app has its own Estimate screen (see "Limits worth knowing").

Validation: the check on every line

Estimatics checks the estimate every time it changes. When you edit, add, duplicate, or remove a line, or rebuild with "Build with AI", the check runs again on its own. You don't press anything.

The validation chip

In the header at the top of the estimate, you'll see a chip:

  • "Validated" (green): every rule passed.
  • "N failed · M warnings" (red if anything failed, amber if there are only warnings).

The chip appears once at least one line has been checked. An empty estimate shows no chip.

After "Build with AI" or "Regenerate" finishes, a message tells you the result right away: "Validation: all rules passed." or "Validation: N failed · M warnings — see the verdict chip."

Fail vs. warn

  • FAIL means something is inconsistent and should be fixed before you send. Examples: a quantity bigger than the room can hold, a line billed in the wrong unit, or two identical lines in the same area.
  • WARN means "take a look". It might be right, but it's worth a second check. Examples: drywall installed with no paint line, or a quantity that can't be checked because the area has no measurements.

Read the full list

  1. Click the chip. The "Estimate validation" window opens with a count at the top ("N lines checked · N failed · N warnings").
  2. Failures are listed first, then warnings. Each issue shows:
    • a code and its verdict, for example "R2 · FAIL" or "R4 · WARN"
    • the area it belongs to ("area-level" when the problem is something missing from the area rather than one line)
    • a plain-English explanation of the problem
  3. Click "Fix line" to open that line and correct it, or "View area" to jump to the area's lines.

If nothing is wrong, the window says "No coherence issues found — every rule passed."

In the lines table

  • A red dot next to a line's "Code" means the line failed a rule. An amber dot means a warning. Hover over the dot to read the reason.
  • "Issues only (N)" filters the table down to the flagged lines, so you can work through them one by one.

What the rules check

CodeWhat it looks forVerdict
R1Quantity vs. room size. A quantity larger than what the area measures (with a tolerance) fails. If the area has no measurements, or its measurements look broken, you get a warning instead, because the quantity can't be checked.FAIL or WARN
R2Duplicates. The same item with the same activity and quantity twice in one area fails. If the copies have the same quantity but each has its own note, it's a warning to confirm both are intended. If the quantities differ and no note tells the copies apart, it's a warning to add one. A separate remove or replace line that overlaps a "Remove & Replace" line of the same item is also a warning.FAIL or WARN
R3Unit mismatch. The line's unit doesn't match the unit the catalog bills for that item.FAIL
R4Missing companion work. Drywall installed with no texture line or no paint line, or something removed with nothing of that trade put back.WARN
R5Antimicrobial after water. A water loss with drywall, insulation, or wood surfaces and no antimicrobial or fungicidal line.FAIL
R6Ceiling assembly. A water-damaged ceiling whose area doesn't scope the full assembly behind the finish: drywall, insulation, texture, antimicrobial sealer, and paint. The issue lists the missing pieces.FAIL
R9Quantity from the wrong kind of measurement. For example, a floor area in square feet applied to an item billed per each.FAIL

ℹ Note

Validation reports; it never changes your estimate. It doesn't add, edit, or remove lines on its own. You decide what to fix. It also isn't a score, and passing it doesn't mean a carrier will accept the estimate. It's a consistency check that catches common mistakes before someone else does.

Validation and reports

When you compose a report that includes the estimate (the Estimate, Complete Report, or a Custom Report) and the estimate has validation failures, Reports stops and asks first: "Estimate has validation failures". Choose "Review first" to go back and fix them, or "Generate anyway". If you generate anyway, the PDF includes a visible validation notice. Warnings alone don't stop the report.

→ Estimate-ready reports


"What's missing": what the scope is still presuming

Some lines depend on facts about the loss: the water category, the flooring material, the year the house was built, and so on. When nobody has entered a fact, Estimatics presumes a value so it can keep building, and tells you so. "What's missing", in the right-hand panel, is that list. If nothing is missing, the card doesn't appear.

The summary card

The card shows a count and a short roll-up, for example:

  • "N factors missing" and "N presumed"
  • "N lines awaiting a measure in M areas": lines with no quantity yet
  • "N integrity warnings": problems with how areas, findings, and measurements are connected

Click "Review all (N)" to open the full list.

The full list

The "What's missing" window has filters at the top: "All", "Missing", "Presumed", "Measures", and "Integrity". Below them:

  • "Area integrity" comes first, with job-wide connection problems. For example, two areas with the same name ("N areas named "X" … Unify them."), an approved area with findings but no measurements, an area using another room's measurements, or a floor area that doesn't make sense.
  • "Whole job" lists job-level facts such as "Year built", "Jurisdiction", and "High-velocity hurricane zone".
  • One section per area lists that area's facts, such as "Water category (IICRC)", "Water class (IICRC)", "Mold condition (NORMI)", "Surface texture", and "Flooring material", plus "N lines pending a quantity".

Each fact is tagged "Missing" or "Presumed", with how many steps of the scope it affects.

Fixing what's missing

Each row takes you to where the fact is entered:

  • "Set" opens the area's Loss Context for water category, water class, and mold condition.
  • "Open area" opens the area in Analyze for facts that come from the evidence, like texture and flooring.
  • "Open Overview" takes you to the job's Overview tab for "Year built".
  • "Open Geometry", "Open Analyze", or "Open area" next to an integrity problem takes you to where it gets fixed.
  • "View lines" shows the lines in that area that are waiting for a quantity.

A row that reads "no input yet — presumed automatically" is a fact the product doesn't have an input for yet. The presumed value is used, and there's nothing for you to fill in.

ℹ Note

Lines without a quantity? Link the area to its scanned room with "Assign geometry" in Analyze. The lines in that area are recalculated automatically. See Areas and approval in Analyze.

"What's missing" doesn't fill anything in for you. Confirm the presumed values that matter before you send the estimate.

"Repair data health"

Sometimes the data behind an estimate gets out of step. For example, a damage record is left over after its evidence is gone, or a finding never made it into the scope. When that happens, a "Repair" button appears on the card ("Repair data health" in the full list).

  1. Click "Repair".
  2. Estimatics removes damage records that no longer have evidence behind them and brings findings that never entered the scope into approved areas. It also confirms draft damage records that have evidence in approved areas.
  3. You'll see what it fixed ("Repaired: …") or "Nothing left to repair."

The button only appears when there's something to repair. Only Super Admin and Estimator can run it.


Estimate Parameters

Click ⚙ "Estimate parameters" at the top of the estimate to open "Estimate Parameters".

  1. From the job (view only): "Type of Loss", "Deductible", and "ZIP". To change them, click "Edit in Job Details". Only Super Admins and Admins can edit job details.
  2. Percentages: set "Overhead", "Profit", and "Tax" ("Materials-only sales tax."). The drawer also has a "Depreciation" field, but the totals don't take depreciation from it. See "How depreciation is worked out" below.
  3. "Year Built": click "AI lookup". If it finds a year, you'll see "Suggested: [year]" with its confidence and source. Click "Apply to Year Built" to use it ("Year Built applied."). If nothing turns up, you'll see "No suggestion found." and "Try again".
  4. "Region / Price List" is for information only: "Managed globally by the platform — per-estimate price lists are not available yet."
  5. Click "Save" ("Parameters saved.").

You can also adjust the tax, overhead, and profit percentages directly in the summary panel.

How depreciation is worked out

Depreciation is calculated line by line, not from one percentage. For each line, Estimatics compares the item's expected life with the age of the property (from "Year Built") or an age set on the line. It applies the result to the material cost only. Roofing lines age from the roof's age when the job has one.

If a line has no age to work from, its Depreciation cell shows an amber dot ("Needs review — set an age to depreciate") and no depreciation is taken. Fill in "Year Built" (the "AI lookup" in the parameters, or the job's details) or set an age on the line.


The Estimate Summary and totals bar

The "Estimate Summary" in the right panel updates as you build:

LineWhat it is
"Subtotal"The sum of the line amounts
"Tax", "Overhead", "Profit"Your percentages and what they add
"RCV"Replacement cost value: the full cost to repair or replace
"Recoverable depreciation"Depreciation that can be released once the work is done
"Non-recoverable depreciation"Depreciation that isn't released, for example when the policy settles at ACV or a roof payment schedule applies
"ACV"Actual cash value: RCV minus depreciation
"Deductible"Taken from the job's insurance details
"Net Claim"ACV minus the deductible (never below zero)

Below it, "Quick Stats" shows "Total lines", "Areas covered", and "Lines missing quantity".

A few messages you may see:

  • "Deductible not set — Net Claim shown before any deductible." Add the deductible with "Edit in Job Details".
  • "Assuming RCV — confirm policy settlement type." The job doesn't say how the policy settles yet.
  • "Recoverable depreciation released on completion: $…" How much depreciation comes back once repairs are done.

Hide the panel with the "Hide summary" button on its edge and a bar stays at the bottom of the screen with "Subtotal", "RCV", "ACV", and "Net Claim".


Limits worth knowing

  • Validation doesn't fix lines and isn't a defensibility score. It flags; you decide.
  • "What's missing" doesn't enter data for you. Some facts have no input in the product yet and are always presumed.
  • One price list for the whole platform. You can't choose a price list per estimate.
  • The deductible, type of loss, and ZIP come from the job. Change them in the job's details, not in the estimate.
  • No comparison with a carrier's estimate.
  • The iPhone shows, the web fixes. The iPhone Estimate screen has the same "Validated" or "N failed · M warnings" chip and a "What's missing" chip with lists. It has no "Fix line", "Set", or "Repair" buttons. Repairing data health and fixing integrity problems happen on the web.
  • On the web, computer or tablet only.

Frequently asked questions

My chip says "1 failed". Can I still send the estimate? Yes. Validation never blocks your work. If you compose a report with the estimate, Reports asks you to "Review first" or "Generate anyway", and the PDF shows a validation notice if you go ahead.

What does "R2 · FAIL" mean? R2 is the duplicate-lines rule. The same item, activity, and quantity appear twice in one area. Remove one, or add a note to each if both are real work.

Why don't I see the validation chip? It appears once the estimate has at least one line to check.

A warning says the quantity "cannot be checked — this area has no measurements". The area isn't linked to a scanned room. Link it with "Assign geometry" in Analyze, or confirm the quantity yourself.

Everything in "What's missing" says "Presumed". Is that a problem? Not on its own: presumed values keep the scope moving. But confirm the ones that change the scope, like water category and class, before you send.

I don't see the "Repair" button. It only appears when there's something to repair.

Why can't I change the price list? The price list is managed for the whole platform. Per-estimate price lists aren't available yet.

The Net Claim looks wrong. Check the deductible in the job's details. If it isn't set, Net Claim is shown before any deductible.

"Year Built lookup failed." Try again. If it keeps failing, enter the year in the job's details and email support@aiestimatics.com.

Our Field Inspector can't find the Estimate tab. That's expected. Field Inspectors don't see Estimate.



Last updated: October 2026 · Questions? Email support@aiestimatics.com

Last updated: October 2026 · Feedback on this article