Recording Video Inspections

A walkthrough video shows the damage in context in a way photos alone can't. Here's how to record one in the iPhone app, the limits for your plan, and how to trim, mark and review videos on the iPhone and the web.

7 min read


A good walkthrough video shows the full extent of the damage in context. It captures conditions that are hard to show in still photos, and gives anyone reviewing the job a clear sense of the property without visiting it.


Video types in Estimatics

TypeBest forAvailable on
VideoRoom-by-room or elevation-by-elevation walkthroughsAll plans, iPhone app
Dual VideoThe main camera plus a picture-in-picture inset from the front or ultra-wide camera, in one videoAll plans, on iPhones that support MultiCam

This guide covers standard video. For Dual Video, see Using Dual Video / MultiCam recording.


Recording a video

Capture unlocks once the inspection has started. If Capture is locked, tap "Start Inspection" first.

  1. Open the job in the iPhone app and tap "Capture" → "Video". Or, on the capture screen, choose "VIDEO" in the mode selector.
  2. Set the area: tap "No area — tap to set" and pick where you are. Once set, the screen shows "You're in: [area]", and every capture after it is filed to that area until you change it.
  3. Tap the record button to start, and again to stop.

If you close the capture screen while recording, the app asks "Stop recording?": choose "Stop & Save", "Discard" or "Cancel".

You can record more than one video in an area. You can't switch modes while recording ("Stop the recording before switching modes").

Recording works without signal. The video is saved on the phone and uploads when you reconnect.


How long a video can be

PlanMax recording lengthMax file size
FIELD5 minutes2 GB
SCOPE10 minutes4 GB
CERTIFY10 minutes4 GB

The iPhone app stops the recording on its own when it reaches your plan's limit. During the 14-day free trial, the account can upload 3 videos in total.

For a longer inspection, record one video per area. Short, focused videos are easier to review and easier to point to later.


Recommended video length

Inspection scopeRecommended length
Single room1–3 minutes
Exterior walkthrough3–5 minutes
Full interior (multi-room)One video per area
Full property overviewOne video per elevation

Recording technique

Start wide, then go close

Open each video with a wide shot of the whole space or surface, so the viewer knows where they are. Then move closer to the damage and describe what you're showing.

Narrate as you go

Your voice is recorded with the video. Describe what you see:

  • "This is the main bedroom ceiling. There's water staining along the north wall."
  • "Here's the baseboard behind the vanity. It's swollen and separating from the wall."

Narration in a video isn't transcribed. To get a written transcript, record a voice note on a photo, or use AI Walkthrough if your plan includes AI. See Voice notes and photo notes.

Movement and stability

  • Move slowly. Fast movement makes footage hard to review.
  • Pause on damage. Hold still for 3–5 seconds on each damaged area before you move on.
  • Keep the camera level.
  • Avoid spinning. Turn slowly if you need to show a full room.

Audio

  • Don't cover the microphone. Hold the phone at chest height.
  • Watch for wind on exterior shots. Shield the phone with your hand on windy days.
  • Cut background noise where you can, like a loud fan or a running generator.

Video quality

The Estimatics app sets its own video quality when you record in the app. Your iPhone's Settings → Camera → Record Video setting doesn't apply to videos recorded in Estimatics.


Uploads and cellular data

Videos are much larger than photos. They upload in the background on their own, like photos, and you can keep shooting while earlier videos upload.

By default, everything uploads on cellular data as well as Wi-Fi. To keep videos for Wi-Fi, go to Settings → "Uploads" and turn off "Upload videos on cellular". If videos aren't uploading and you're not on Wi-Fi, check that switch first.

Let videos finish uploading before you sign out or delete the app. "Log Out Anyway" with files still pending deletes them from the phone, and they can't be recovered.

→ How media syncs to the cloud


Trimming, clips and markers on the iPhone

Go to "Capture" → "Videos". Videos are split into "Complete Videos" and "Trim & Clips". Open a video to use:

  • "Trim": set a start and end, then "Save as Edited Copy".
  • "Clip": set a start and end, give it a title, then "Save Clip". Clips must be at least 0.5 seconds.
  • "Marker": add a titled marker at the current time. "Timeline Markers" lets you jump to one or delete it.
  • "Annotate": grab a frame and mark it up like a photo.

Trims and clips are copies. The original video stays as it was, under "Complete Videos".

The "…" menu has "Evidence Info" (who captured it, when, where, the device, and the file's SHA-256 fingerprint), "Save to Photos" and "Delete".


Reviewing videos in the web app

Open the job → Capture → "Videos". Videos sit alongside the photos. A video made from another one shows a "Trimmed", "Clip" or "Frame" label.

Click a video to open it. From the viewer you can move with "Previous video" / "Next video", see its area and capture details, and use "Edit Video", "Download" and "Delete".

In "Edit Video":

  • "Marker": add a marker at the current time with a title and an optional note, then "Save".
  • "Annotate": pauses the video, captures the frame and opens it in the markup editor.

Markers and annotated frames are saved. Trim and clip in the web editor are not saved. To keep a trimmed copy or a clip, make it in the iPhone app.

→ Video frame markup


Frequently asked questions

Can I add a video from my iPhone's Camera Roll? Not in the iPhone app: it records videos in the app only. In the web app, open Capture → "Videos" and click "+" to upload. Web uploads accept .mp4, .mov, .avi, .webm and .mkv, up to 5 videos at a time. Only the job's assigned Field Inspector or the Super Admin can upload photos and videos, and only while the job is in "Inspection In Progress".

Can I download all the videos at once? No. The "Download" button in the Capture tab downloads a ZIP of the job's photos only, even from the "Videos" tab. Download each video from its viewer.

The video uploaded but plays with no audio. What happened? Check that Estimatics has microphone access: iOS Settings → Estimatics → Microphone. Turn it on, then record again.

A video won't play in my browser. Some browsers can't play every video format. Download the video and play it on your computer.

Can clients or carriers view the videos directly? Not through a link. The 24-hour photo share link includes photos but not videos, and reports are PDFs. To send someone a clip, download it and send the file.

Is a video part of the job's evidence record? Yes. Every file that reaches Estimatics gets a SHA-256 fingerprint and an entry in the job's event history, on every plan. On CERTIFY, you can see that record in History → Evidence. See History and evidence.



Last updated: October 2026 · Questions? Email support@aiestimatics.com

Last updated: October 2026 · Feedback on this article