Organizing Media by Area
Areas tell Estimatics, and the AI, where each photo was taken. Where areas come from, how the AI files overview photos and suggests areas for the rest, and how to add, rename and fix areas on the iPhone and the web.
9 min read
Every photo belongs to an area: the room or zone of the property where it was taken. Areas are how Estimatics, and the AI, know what a photo is showing. A photo filed to "Master Bathroom" gives the analysis context that a loose photo doesn't.
Areas also shape the rest of the job. Analyze reviews damage area by area, the estimate is built per area, and Geometry measures each area.
Where areas come from
A job's areas come from four places:
- The iPhone, during capture. The inspector sets the area once and every photo after that is filed to it.
- A LiDAR scan. Each scanned room becomes an area, with its measurements. Photos taken during the scan are placed in the room automatically.
- The AI. Overview photos are filed to a room automatically when the AI is confident (see below).
- Declared areas. Anyone who edits Analyze can add an area by name.
Photos without an area appear under "Unassigned".
Setting the area while you capture (iPhone)
The fastest workflow is to set the area before you shoot. It removes the sorting step entirely.
- On the capture screen, tap the area chip: "No area — tap to set".
- In "Set Area", pick from:
- "Measured Areas": rooms from a LiDAR scan
- "Declared Areas": areas someone added by name
- "Add From Standard Spaces": room types from the catalog
- "New area…": type your own name ("Area name" → "Create")
- The chip now reads "You're in: [area]". Every photo you take is filed there until you change it.
Creating a new area needs a connection ("Could not create area. Check your connection."). The app reminds you: "Prefer an existing area — new ones split your evidence." Two areas with similar names split the photos of one room in two.
During a LiDAR scan the chip reads "Scanning — rooms auto-detected": the scan finds the rooms for you.
ℹ Note
For commercial properties or multi-unit buildings, declare your areas before the inspection starts ("Building A", "Unit 101", "Building C"). The inspector then picks them from "Declared Areas" instead of creating names on the spot.
The room catalog
Estimatics starts with 100 standard room types, in three categories:
| Category | Entries | Covers |
|---|---|---|
| Residential | 52 | Living areas, bedrooms, bathrooms, kitchen and dining, garage and storage, utilities, exterior, roof, other |
| Commercial | 38 | Common areas, work areas, retail, commercial kitchen, utilities, exterior, roof, other |
| Standard | 10 | General areas, elevations, exterior and roof that apply to any property |
Each type has a color by subcategory (bedrooms indigo, bathrooms cyan, kitchen and dining red, exterior emerald, garage and storage gray), so areas are easy to tell apart.
These are the "Standard spaces" you see when you add an area. If a space isn't in the list, give it a custom name in the job.
Super Admins and Admins can see the list in Settings → "Room Catalog". The catalog is shared across Estimatics, not kept per company, so we recommend leaving it as is and using custom area names in your jobs instead.
How the AI files photos
When a photo uploads, Estimatics first classifies what kind of shot it is. You see the result as a label on the thumbnail:
| Label | What it is |
|---|---|
| "Overview" | The wide shot that establishes a room or elevation |
| "Damage" | A close-up of the damage itself |
| "Element" | A specific component: a fixture, a vent, a joint |
| "Progress" | Work underway |
| "Document" | A photographed document |
| "Context" | Surrounding context |
It only guesses the room on overview photos
Only overview photos get a room guess. A close-up of a water stain can't show which room it's in, and guessing from one is how photos end up in the wrong area. So Estimatics doesn't try.
For an overview photo, the AI compares it to the room catalog. When it's confident, it files the photo to that room automatically, creating the area in the job if it doesn't exist yet. When it isn't confident, the photo stays in "Unassigned" rather than being guessed.
This is why the wide shot matters. Shoot the overview first, and set the area on the iPhone so the close-ups that follow land in the same room.
It never overrides you
The AI leaves a photo's area alone when:
- A person set or removed the area by hand. A human decision is final, including a deliberate "no area".
- The area came from a LiDAR scan.
Your choice is never silently replaced.
Fixing a photo's area
On the iPhone
- One photo: open it, tap "…" → "Reassign Tag", and pick the area.
- Several photos: in "Capture" → "Photos", tap "Select", choose the photos, then "Assign Tag". The list shows "Job Tags", "Areas on the plan" and, under "Add Tag", catalog rooms you can add.
- "Suggest areas": the AI proposes areas for unassigned photos; tap "Accept" or "Dismiss".
On the web
On the web you can't move a photo to an area by hand. Use AI suggestions instead:
- In Capture → "Photos", click the sparkle icon, "Suggest areas for unassigned photos". It only appears while there are unassigned photos.
- In "Area suggestions", click "Suggest areas" ("Looking at your unassigned photos…").
- For each proposed area ("Suggested"), choose the photos ("Select all" / "Select none"), then click "Accept N" or "Dismiss N".
- "Run again" repeats the pass. "Close" closes the window while the AI keeps working.
Things to know:
- The AI only proposes areas that already exist in the job. It doesn't create new ones. If it proposes nothing, add the area first (see below) and run it again.
- Nothing moves until you click "Accept".
- Each pass looks at a limited batch of photos. If you have many unassigned photos, use "Run again" for the rest.
- When every photo has an area, you'll see "Every photo is already assigned to an area — nothing to suggest."
→ Reviewing and managing captured media
Adding an area on the web
Areas are added in the Analyze tab, not in Capture:
- Open Analyze and click "Add area" ("Pick a standard space or type any name.").
- Pick one of the "Standard spaces", or type a "Custom name" (up to 100 characters), and confirm.
The area appears in the Analyze board once photos are assigned to it. An area with no photos can't be analyzed. Super Admins, Estimators and Field Inspectors can add areas.
→ Areas and approval in Analyze
Renaming, merging and splitting areas
- Rename: in Analyze, open the area and use "Rename area"; or in the Geometry tab, use the area card ("Area name" → "Rename"). On the iPhone, tap an area on the Geometry floor plan → "Rename area". The new name follows every photo and carries over to Analyze.
- Merge or split (scanned areas): in the Geometry tab, split an area with a divider or delete the boundary between two areas to merge them. When you merge, the photos and data of the absorbed area move to the one you keep.
You can't rename or delete areas from the Capture tab, change an area's color, or reorder areas by hand.
Area changes show up for everyone on the job without a refresh, so an inspector filing photos in the field updates what a reviewer sees on the web.
Unassigned photos
Unassigned photos don't count as evidence for any area. Analyze reminds you: "N photos aren't assigned to an area yet — assign them from the Capture tab so they count as evidence."
Get "Unassigned" to zero before you call the inspection complete: run "Suggest areas for unassigned photos" on the web, or reassign the rest on the iPhone. An area with no photos is the other signal worth reading: it usually means that space wasn't documented.
Frequently asked questions
Can I rename an area after photos are filed to it? Yes, from Analyze or Geometry. Every photo follows the rename.
Can I delete an area? There's no delete button for areas in the Capture or Analyze tabs. To combine two scanned areas, merge them in Geometry; their photos move to the area you keep.
Can I reorder areas or change their colors? No. Colors come from the room catalog.
Should I create a new area or reuse one? Reuse an existing area whenever it's the same space. Each new name splits that room's evidence in two.
Do areas actually change the AI findings? Yes. The area is part of the context the analysis reads. Unassigned or misfiled photos produce weaker findings.
Why wasn't this photo filed automatically? Usually because it isn't an overview shot, or because the AI wasn't confident enough to guess. Use "Suggest areas for unassigned photos", or set the area on the iPhone.
Capturing photos
Technique that produces accurate findings and good photo scores.
Media gallery
Browsing, downloading, sharing and removing media on the web.
LiDAR room scanning
Scan the interior so rooms become measured areas.
Areas and approval
The Analyze areas board, "Add area" and approving an area for the estimate.
Last updated: October 2026 · Questions? Email support@aiestimatics.com
Last updated: October 2026 · Feedback on this article