Using Dual Video / MultiCam Recording
Dual Video records your iPhone's main camera with a small picture-in-picture inset from a second camera, all in one video. Here's which iPhones support it, how to record, and how to choose the inset camera.
7 min read
Dual Video records from two iPhone cameras at the same time and gives you one video. The main back camera fills the frame. A second camera plays in a small picture-in-picture inset in the top-right corner.
You choose what the inset shows:
- "Front camera": you, explaining the damage while the main camera shows it.
- "Ultra-wide back": a wider view of the same scene, so the viewer sees where the close-up sits.
Dual Video is available on every plan, in the iPhone app.
What you need
| Requirement | Details |
|---|---|
| iPhone app | iOS 18.4 or later. The app runs on iPhone only |
| MultiCam support | Your iPhone must support recording from two cameras at once (Apple's MultiCam). If it doesn't, "Dual Video" doesn't appear in the Capture menu |
| "Ultra-wide back" inset | Needs an iPhone with an ultra-wide back camera. Without one, that option is grayed out and the inset uses the front camera |
| Inspection started | Capture unlocks after you tap "Start Inspection" |
ℹ Note
The mode selector on the capture screen can still show "DUAL VIDEO" on an iPhone that doesn't support it. If you pick it and see "Dual video is not supported on this device.", switch to "VIDEO".
When to use Dual Video
Use it when one camera angle doesn't tell the whole story.
- Narrated walkthroughs. With the front camera inset, the viewer sees the damage and you describing it, in the same frame.
- Detail plus context. With the ultra-wide inset, the main camera shows the detail (a stain line, a cracked tile, a lifted shingle) while the inset shows the wall, room or elevation it belongs to.
- Interior water damage. Follow the staining up close while the inset keeps the whole wall in view.
Standard video is enough when:
- The damage is close-range and one angle shows it clearly
- Your iPhone doesn't support MultiCam
- You want the smallest possible file
Recording a Dual Video
- Open the job in the iPhone app. If you haven't yet, tap "Start Inspection".
- Tap "Capture" → "Dual Video". Or, on the capture screen, choose "DUAL VIDEO" in the mode selector.
- Wait a moment while the app shows "Configuring Dual Video...".
- Set the area: tap "No area — tap to set" and pick where you are. The area stays set for every capture after it until you change it.
- Tap the record button to start, and again to stop.
- Wait while the job title shows "Saving...". Don't leave the app until it finishes. The app combines the two recordings at this step, and leaving early can lose the Dual Video.
If you close the capture screen while recording, the app asks "Stop recording?": choose "Stop & Save", "Discard" or "Cancel".
You can't switch modes while recording ("Stop the recording before switching modes").
How long you can record
Dual Video follows the same limit as standard video. The recording stops on its own when it reaches your plan's limit.
| Plan | Max recording length |
|---|---|
| FIELD | 5 minutes |
| SCOPE | 10 minutes |
| CERTIFY | 10 minutes |
During the 14-day free trial, the account can upload 3 videos in total.
Choosing the inset camera
You can change the inset camera in two places:
- In Settings: go to Settings → "Dual Video PiP Camera" and choose "Front camera" or "Ultra-wide back".
- On the capture screen: in "DUAL VIDEO" mode, tap the settings button and pick a camera. The preview restarts with the new inset.
If your iPhone has an ultra-wide back camera, the inset starts on "Ultra-wide back". Otherwise it starts on "Front camera".
What gets uploaded
The video you review is the combined one: the main camera with the inset in the corner. It's filed to the area you set, and uploads in the background like any other capture.
The app also keeps the original recording from each camera. Each original is fingerprinted (SHA-256) on the phone before the two are combined, and uploaded with the job as part of its evidence record. If the phone can't keep the originals, only the combined video is uploaded.
A Dual Video uploads more files than a standard video, so it uses more data and storage. To keep videos off cellular data, go to Settings → "Uploads" and turn off "Upload videos on cellular". Videos then wait for Wi-Fi.
→ How media syncs to the cloud
Reviewing Dual Video recordings
In the web app: open the job → Capture → "Videos". A Dual Video plays like any other video. Use "Edit Video" to add a "Marker" at a key moment or "Annotate" a frame in the markup editor.
On the iPhone: go to "Capture" → "Videos". Open the video to use "Trim", "Clip", "Marker" or "Annotate". Trims and clips are saved as copies; the original stays as it was.
Battery and storage
Recording from two cameras uses more battery and more space on the phone than standard video.
For a long day of Dual Video:
- Start with a well-charged iPhone, and bring a battery pack
- Keep some free space on the phone
- Let uploads finish on Wi-Fi before you sign out or delete the app
Troubleshooting
| You see | What to do |
|---|---|
| "Dual video is not supported on this device." | Your iPhone doesn't support MultiCam. Use "VIDEO" |
| "Selected PiP camera is unavailable." | Change "Dual Video PiP Camera" to "Front camera" |
| "Dual preview failed to start. Close other camera apps and try again." | Close any other app using the camera, then try again |
| "Unable to configure microphone for dual video." | Close other apps that may be using the microphone, then try again |
Frequently asked questions
Can I choose which two cameras to use? The main camera is always the back camera. For the inset, choose "Front camera" or "Ultra-wide back".
Do I get two separate videos? The video you review is one combined video. The original recording from each camera is also uploaded with the job as evidence, when the phone can keep them.
Can I use Dual Video offline? Yes. Dual Video is recorded and saved on the phone, and uploads when you have signal again.
My iPhone doesn't show "Dual Video" in the Capture menu. Why? Your iPhone doesn't support MultiCam, so the option is hidden. Record with "Video" instead. Also make sure you're on the latest version of the Estimatics app.
Does Dual Video cost extra? No. It's included on every plan, with the same length limits as standard video.
Recording video inspections
Standard walkthrough video: technique, limits and editing.
Capturing photos
How to capture photos that produce accurate AI findings.
Video frame markup
Add markers and annotate frames in your videos.
How media syncs
How Dual Video files upload, and how to keep them off cellular data.
Last updated: October 2026 · Questions? Email support@aiestimatics.com
Last updated: October 2026 · Feedback on this article