FIELD Lite — Invite Someone Else to Capture

Send a link to whoever can get to the property — a homeowner, a tenant, a contractor already on site — and have them photograph it on their iPhone, guided step by step, without an account or a seat.

8 min read


Some properties don't need one of your people to drive there. FIELD Lite sends a link to whoever can get to the building (the homeowner, a tenant, a contractor already on site, a local adjuster in a market where you have no staff) and guides them through capturing it on their iPhone. What they send lands in the job like any other capture, with the same evidence record.

They never create an account or choose a password, and they don't take up a seat.


When to use it

  • The property is four hours away and the claim is straightforward.
  • A contractor is already on the roof this afternoon and you aren't.
  • The occupant can show you the damage today; your inspector can come Thursday.
  • You need a second look at one room, and sending someone for one room doesn't make sense.

It isn't a replacement for an inspection that needs a professional's judgment on site. It's a way to get evidence from a building nobody on your team is standing in.


Who can send an invitation

  • Super Admin, Admin and Coordinator
  • The Field Inspector assigned to that job

An invited person can't invite anyone else. You can send an invitation while the job is open and its inspection hasn't been closed.


Sending the invitation

In the web app

  1. Open the job and go to the Capture tab.
  2. Click "Invite to capture" in the bar above the media. (Once a job has invitations, it reads "Crew".) The "Who is taking the photos" panel opens.
  3. Click "Invite someone".
  4. Enter their "Name", and a "Mobile number" or an "Email". One of the two is enough.
  5. Read the cost line, then click "Send invitation". It reads either "This capture comes out of your prepaid balance — N left." or "This capture will be billed at $25."
  6. Copy the "Link" and the "Code (if they have to install the app first)", then click "Done".

In the iPhone app

Open the job and tap the invite icon in the bottom bar, or go to "Job Overview" → "Team" → "Invite property owner to capture". Then tap "Invite someone" and follow the same steps: name, mobile number or email, check the cost, "Send invitation", then "Share" or "Copy link" and "Done".

ℹ Note

The link and the code are shown once. Only fingerprints of them are stored. If you close the screen without copying them, use "Resend", which issues a new link and code and retires the old ones.

How the invitation reaches them

  • If you enter an email, Estimatics emails the invitation for you: the link, the code, and when the link stops working.
  • If you enter only a mobile number, Estimatics doesn't text them. Send the link and code yourself by text or WhatsApp. It's a short link, so it survives being pasted into a message.

You can also send it yourself on top of the email.


What the other person sees

With the Estimatics app installed, the link opens the app straight into their job.

Without the app, the link opens a page that sends them to the App Store. After installing, they open the app, choose "I have a capture code" and enter the 9-digit code (NNN-NNN-NNN).

After 5 wrong attempts, the code stops working until you resend the invitation. The link isn't affected.

Inside, they see only their job, with two modules: Capture and Notes. In Capture they can take photos, record video and, on an iPhone that supports it, scan with LiDAR. The other modules show grayed out with the message "[Module] is part of the professional tools your insurer or contractor uses on this claim." They can't reach any other job in your account.

When they're done

They tap ✓ → "Send your photos?" → "I'm finished". The app warns them that it's final: they're signed out, and the link and code stop working.

If photos are still uploading, they'll see "Your photos are still uploading". They need to keep the app open, with signal, until everything has reached you.


Following it without phoning them

The job lists every invitation with its status, in the "Crew" panel on the web and in the invitation list on the iPhone:

StatusMeaning
Invited, not startedThe invitation was sent and no photos have arrived yet
Taking photosThey're in, and at least one photo has arrived
FinishedThey tapped "I'm finished", or their access closed after they had sent photos
ExpiredSeven days passed with nothing sent
CancelledYou cancelled it

"Resend" issues a fresh link and code, restarts the 7-day window and emails them again if you entered an email. The previous link and code stop working. Resend is available on any invitation that isn't finished. Resending doesn't charge again.

"Cancel" closes the link, the code and their session immediately, even if they're mid-capture.


What it costs

$25 per capture, on every plan.

A capture is one person, one link, one property. It's counted once, when you send the invitation, whether they send four photos or forty and whether or not they tap "I'm finished". Resending doesn't count again.

You get the capture back when nothing was sent:

  • You cancel the invitation before any photo arrives. The charge is released right away.
  • The invitation expires with no photos. The charge is released automatically.

If they sent photos but never tapped "I'm finished", the capture counts. They did the work.

Prepaid packs

Buying ahead costs less per capture:

PackPricePer captureWithout a pack
10 captures$200$20$250
25 captures$400$16$625
50 captures$600$12$1,250

Prepaid captures don't expire, are shared across your team, and are used before anything is billed at $25. Buy them in Settings → Billing → "Capture Credits". Only the account owner (Super Admin) can buy packs. The same page shows your "Prepaid captures", how many you've "Used this month", and a "Recent activity" list of every invitation and pack.

Past 500 captures a month, this stops being self-service. Email support@aiestimatics.com to talk about a better arrangement for that volume.

→ Credits and usage-based charges


The evidence you get back

A FIELD Lite capture isn't a lesser record. Every file is recorded the same way as one your own inspector takes:

  • a SHA-256 fingerprint taken on the phone before upload, and checked again when the file arrives
  • GPS location, or a note that location permission was refused (which isn't the same as no signal)
  • the device clock offset, so the capture time can be reconciled later
  • the capture origin, marking that it came from an invited capture rather than a member of your team

On CERTIFY, you can see this record in the job's History → Evidence. → History and evidence


Limits worth knowing before you buy

Whoever you invite needs an iPhone. There is no Android version, so someone with an Android phone can't use the link. If you buy captures in bulk, expect some of the people you'd invite to be unable to use one; send your own inspector to those properties.

The link works for 7 days, once. Finishing the capture or cancelling the invitation closes it earlier.

One invitation, one job. An invitation is tied to the job it was sent from. Someone photographing two of your properties needs two invitations, which are two captures.


What happens to the photos afterwards

Nothing changes about them. When the link expires, or they finish, or you cancel, the photos, videos and details they already sent stay in the job. They're yours and they feed analysis and reports like any other capture. On SCOPE and CERTIFY accounts, the photos are analyzed by the AI automatically after they upload, within your monthly AI allowance; the AI proposes findings and your team confirms them.

When they tap "I'm finished", the app signs them out and clears the job from their phone. What ends is that person's way in.



Last updated: October 2026 · Questions? Email support@aiestimatics.com

Last updated: October 2026 · Feedback on this article